How Are Injections Manufactured? Pushkar Pharma's 5-Step Process
Direct answer: Pushkar Pharma, a sterile injectable manufacturer in Kala Amb, Himachal Pradesh, makes injections in five steps: testing and dispensing raw materials, formulating the liquid, filtering it to sterilise it, filling vials under ISO Class 5 clean air, and sealing and capping. Each step exists to stop one specific problem from reaching the patient's bloodstream. The facility is WHO-GMP certified.
An injection goes straight into the body, with no stomach or liver to filter it first. That is why sterile manufacturing is held to a higher standard than any tablet or syrup. Here is what happens at each step.
Step 1: How Are Raw Materials Dispensed and Tested?
Direct answer: active ingredients and sterile solvents are checked in a cleanroom lab, chemists run HPLC tests for purity, and materials are weighed in negative-pressure booths.
Why it matters: a contaminated or impure ingredient can't be fixed later. Testing at the start is the cheapest place to catch a problem.
Step 2: How Is the Liquid Formulated?
Direct answer: the ingredients are dissolved in high-purity water in a 316L stainless steel jacketed tank, with agitators and temperature control keeping the drug evenly distributed.
Why it matters: even distribution means every vial from the batch carries the same amount of medicine. The water itself is Water for Injection (WFI), produced by multistage distillation at 80°C to prevent pyrogens, which are fever-causing contaminants.
Step 3: How Is the Liquid Made Sterile?
Direct answer: it passes through double 0.22-micron membrane filters that remove bacteria and particles. Filter integrity is then confirmed with bubble point tests, and the sterile liquid moves into sterile tanks under nitrogen pressure.
Why it matters: the filter is the main barrier between a non-sterile liquid and a sterile one. A filter that has not been tested may let bacteria through without anyone knowing.
Step 4: How Are Vials Filled?
Direct answer: depyrogenated glass vials move along a conveyor under ISO Class 5 unidirectional airflow. Precision pumps dose the liquid, and nitrogen displaces oxygen in each container.
Why it matters: this is the moment the sterile liquid is exposed to the air. ISO Class 5 is the cleanest grade, and operators work in air showers and full sterile gowns, shields and double gloves. The vials are heated in a tunnel above 250°C beforehand to remove endotoxins. Nitrogen stops the active ingredient from oxidising inside the vial.
Step 5: How Are Vials Sealed and Capped?
Direct answer: machines seal ampoules or fit rubber stoppers on vials, then an automated crimper adds aluminium flip-off seals to block air and particles.
Why it matters: a poor seal lets air and microbes in after the sterile work is done. The seal is the last line of defence.
A Real Case That Shows Why Sterility Matters
In 2012, a fungal meningitis outbreak in the United States was traced to contaminated steroid injections made by a compounding pharmacy. More than 60 people died. The cause was a failure of sterile manufacturing, the exact thing the five steps above are designed to prevent.
The lesson for any buyer: ask a manufacturer to show how each of these five steps is controlled and tested, not just that it exists.
What Do the Quality Tests Cost?
The page lists the typical per-batch testing costs:
Test | Cost per batch |
Sterility test | ₹15,000–₹35,000 |
Bacterial endotoxin (LAL) test | ₹10,000–₹25,000 |
Particulate matter test | ₹8,000–₹18,000 |
Potency test (HPLC/UV) | ₹20,000–₹45,000 |
Container leakage test | ₹5,000–₹12,000 |
Ask any manufacturer whether these tests are included in the batch price or billed separately.
Where Pushkar Pharma Fits
Pushkar Pharma makes beta-lactam antibiotics, pain management liquids, multivitamin infusions, emergency cardiovascular products and dry powder vials. It offers pilot-scale and commercial-scale production, and third-party manufacturing that avoids the ₹1.5 crore to ₹5 crore the page estimates for building your own plant. Its stated batch price starts at ₹2.5 lakh. Run the five steps above as a checklist and ask for the documents behind each one.
The Bottom Line
Injections are made in five steps: test the ingredients, formulate the liquid, filter it sterile, fill under ISO Class 5 air, then seal and cap. Each step blocks a different risk. Ask any manufacturer, including Pushkar Pharma, to show the documents behind every step before you place an order.
For the full process, see Pushkar Pharma's injection manufacturing process guide, or visit Pushkar Pharma to discuss third-party injection manufacturing.
Comments